10
Automatic Return
In auto return mode, the carrier will return automatically every time the
SPACE
bar or the
HYPHEN
key is pressed in the hot zone.
To activate auto return, press the
CODE
+
AUTO
key.
And to cancel auto return, press the
CODE
+
AUTO
key again.
Index & Reverse Index
To move the paper up by half a space, press the
INDEX
key.
To move the paper down by half a space, press the
CODE
+
REV INDEX
key.
RELATED TO THE CORRECTION MEMORY
Your typewriter has a one line correction memory. This allows you to automatically
correct characters on the current line.
Correcting One Character
To correct the last typed character, press the
X
key. Then the carrier will be
backspaced and the character will be erased.
To correct a character printed at any position on the current line, move the carrier to
the character to be corrected and press the
X
key.
Manual Correction
To correct a character beyond the correction memory,
1) Move the carrier to the position on the character which is to be erased.
2) Press the
X
key.
3) Type the incorrect character.
Word Correction
Move the carrier to the end or next space position of the word to be corrected, and
press the
CODE
+
WORD
key. The word is then erased.
✭
If you want to correct a bold printed character or underlined character, you
should set the bold or underline MODE before the correction.
Relocation
Press the
RELOC
key to bring the carrier to the one space after the last typed
character.
-9-
