7
8
smithandnoble.com
800.248.8888
Adding or Removing
Carriers to the Rod
Your track rod will come with all
master carriers and regular carriers
pre-installed.
If you need to add or take out some
carriers depending on your drapery,
unscrew the End Cap from the rod.
Remove the carrier & end stop and
either add or take out the carriers
needed.
Placing End Stop on
the Rod
SPLIT DRAPERY (A)
Once all carriers have been placed in
the track, for split drapery, place end
stop in between the first carrier from
each end and the second carrier so
end of drape does not move when
drape is closed.
ONE WAY DRAW DRAPERY (B)
For one way draw drapery, place
end stop in between the first carrier
from the end
and the second carrier
of the side you won’t be opening,
so the end of drape does not move
when drape is closed.
Place another end stop right before
the beginning of the end cap to
prevent master carrier from moving
all the way to the end.
Depending on your order, you may
have received a rod connector.
A rod connector is the short piece of
metal placed inside each end of the
rods in a multi-segment system to
join them together.
Join track sections together and
fasten securely with set screws.
STEP 3 - ATTACHING THE ROD CONNECTOR
STEP 4 - PLACING CARRIERS & END STOPS
2 SEGMENTS OF ROD
ROD CONNECTOR
ROD
ROD CONNECTOR
SPLICE
B
One Way Draw
End stop & Carrier
positions
A
Split Draw
End stop & Carrier
positions
END STOP
END
STOP
END
STOP
FIRST
CARRIER
MASTER
CARRIER
MASTER
CARRIER
CARRIERS
