11
12
smithandnoble .com
800 .248 .8888
ACCESSORIES
ACCESSORIES
Tiebacks (optional)
STEP 1
In order to locate where to install your
tiebacks, measure the height of the
window and divide this by two . Using
the previous calculation, mark that spot
on the wall with a pencil .
To ensure you like the way the panel
drapes, gather one side and sweep
it over to the approximate proposed
location . Once you’re sure the tieback is
in the perfect location, use your pencil to
mark the spot to install it .
Measure the distance from the bottom
or top of the window to the tieback to
mark the other side and ensure they’re
even .
Now hold the tieback hardware on the
wall at the desired location and rest
a level above it, adjusting it until it’s
straight .
Cont . on pg 13
Baton/Wand (optional)
After your hardware is installed, attach
the baton to the eyelet of the first ring
by the clip .
BATON/
WAND
CLIP
EYELET
DRAPERY
RING
Push clip through
the eyelet of the
drapery clip
Baton/Wand
X
Figure A
