COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
7 Operator interface
The operator interface of the COSMOS 3000 (where present) is the VISIO 3000, consisting of an alphanumeric display
with 2 rows of 8 characters each and 4 directional keys. The VISIO is installed on the front side of the driver and is
connected to the HMI.
7.1 Function of the keys
◄
Navigation: by pressing the left arrow, you go back to the upper level menu. If you are in the
main menu, the device status will be displayed. By pressing this key again, the firmware version
and the driver model will be displayed.
Data modification: it shifts the tab on the figure on the left side of the displayed figure. If the tab
is already on the figure on the extreme left, no shift occurs. It is possible to eliminate a
modification, while it has not been confirmed yet, by pressing this key for 1 second.
►
Navigation: by pressing the right arrow, you go to the lower level menu. The items accepting a
lower value, that is to say a submenu, are indicated by “>“.
The active entry is situated on the first row of the LCD.
Data modification: by pressing this key for at least 1 second, you activate the mode to modify the
selected parameter (hereinafter indicated by the symbol
). This mode is identified by the
presence of the tab below the character situated at the extreme right: by pressing this key, you
shift the tab on the figure on the right side of the displayed figure. If the tab is already on the
figure on the extreme right, no shift occurs.
In order to confirm the modification, press this key for at least 1 second.
▲
Navigation: By pressing the arrow “upwards”, you go to the previous entry of the current menu. If
you are at the first entry of the main menu, you go back to the driver status message.
Data modification: it increases the figure on which the tab is positioned. If the figure reaches the
maximum value, the LCD will try to increase the figure on the left, if it is not already at its
maximum value.
▼
Navigation: by pressing the arrow “downwards”, you go to the next entry of the current menu.
The end of the list of the entries in the menu is displayed by a series of hyphens (-).
Data modification: it decreases the figure on which the tab is positioned. If the figure reaches the
minimum value, the LCD will try to decrease the figure on the left, if it is not already at its
minimum value.
Ver. 1.07
Pag. 54
