Designed and developed by Proto Magic Innovations Ltd for SmitCare Copyright 2004-2014
Patents granted: GB 2404369 GB 2420551 Patents pending: GB1111539.1 GB1111537.5 GB1111536.7
3
3. Engage the trombone locking pin;
this may require minor re-alignment
of the trombone. Next connect the
strap bracket to the elevator frame
with the thin cream strap leading
down the bed. The short brown strap
must be fed through the T-slot in the
bracket, as illustrated.
Repeat steps 2 and 3 at the other
side of the bed.
If you are to use the DreamMaster
Light with the Knee-Break, refer to
the Knee-Break fitting instructions
before you proceed to point 4.
4. Connect one of the 2.5m brown
straps to the lower female buckle
from the strap bracket at one side of
the bed. Pass the long strap under
the bed and connect at the other
side. Tighten the strap to secure the
elevator to the bed base, then tidy
away any excess strap to avoid a trip
hazard.
5. Ensure the thin cream straps are
accessible from each side of the bed,
then replace the mattress.
Take the remaining 2.5m strap and
connect each side to the available
female buckle and tighten. Softer
mattresses will need less tension in the
strap than thicker, firmer mattresses.
Tidy away excess strap to avoid a trip
hazard.
