smirthwaite BROOKFIELD HI-LO, Инструкция по эксплуатации

Страница: 12 / 32

10
To refit the armrests:

Offer up the armrest to the side of the chair. Ensuring the curved side on the armrest
top is facing the inside of the chair.

Insert the thread of one of the handwheels through a black washer. Then pass the
exposed thread through one of the slots in the armrest and into the corresponding
hole on the side of the chair.

Tighten the handwheel by turning clockwise until it is fully tightened.

Repeat for the other handwheel.

Repeat for the other armrest.
5.3 FOOTRESTS
5.3.1 INDEPENDENT FOOTREST
The height and the angle of the footrest can be adjusted.
5.3.1.1 HEIGHT
To adjust the height of the footrests:

Ensure a firm grip is applied to the footrest that is to be adjusted.

Pull the necessary plunger pin (9 &10), located on the back of the footrests, until it
has fully retracted.

Keeping the plunger pin (9 & 10) pulled out, slide the footrest up or down to
approximately the desired height.

Release the plunger pin (9 & 10) and move the footrest up and down slightly until
the plunger pin (9 & 10) clicks.

Ensure the plunger pin (9 & 10) has fully engaged by checking that it has fully
retracted and that the footrest is secure.

Repeat for the other footrest.
9
10