2
FlashRunner Quattro User's Manual
TCSETPAR PWDOWN 10
TCSETPAR PWUP 10
7. After specifying the target device settings, we are ready to transfer to
FlashRunner the binary image to be programmed into the target device.
FlashRunner accepts only image files in a .frb (FlashRunner Binary)
format. To convert your binary, Intel-Hex or S19 image file to the
FlashRunner format, click the
“Create FlashRunner Binary Format”
button. The following dialog box will appear.
Figure 2.3: FlashRunner Control Panel, Binary File Conversion
In the
“Input”
section, specify the source file to be converted, its
format, and the address from which the file conversion will start (offset).
In the
“Output”
section, specify the output filename and the value used
to fill unused locations.
Click the
“OK”
button. The FlashRunner Binary file will be created in
the local
\BINARIES
folder.
8. To transfer the created image to selected programming module, send
the following command:
FSSENDFILE YMODEM DEMO.FRB
In this example, the image file is called
DEMO.FRB
. The following
dialog box will appear.
23
