41 / EN
Washing Machine / User’s Manual
4.3.7.2 Functions/Programs selected
by pressing the key for 3”
• Drum Cleaning
Press and hold the 1st auxiliary function key for
3 seconds to select the programme.
Use regularly (once in every 1-2 months)
to clean the drum and provide the required
hygiene. Operate the programme while the
machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. “2”. When the programme
is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
load inside and aborts the programme.
• Child Lock
Use Child Lock function to prevent children
from tampering with the product. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• You can switch on and off the product
with On / Off button when the Child
Lock is active. When you switch on
the product again, programme will
resume from where it has stopped.
To activate the Child Lock:
Press and hold 2nd auxiliary function
button for 3 seconds. In the programme
selection display on the panel, „CL 3-2-1 On“
light will turn on. When this light is on you can
stop pressing on
2nd
when this warning is
displayed.
To deactivate the Child Lock:
Press and hold 2nd Auxiliary Function
button for 3 seconds. In the programme
selection display on the panel, „CL 3-2-1 Off“
light will turn on.
• Anti Piega (Anti-)
This function is selected when the 3rd auxiliary
function is pressed and held for 3 seconds
and the programme follow-up light for the
relevant step turns on. When the function is
selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at
the end of the programme. You can cancel
the programme and take your laundry out at
any time during the 8-hour duration. Press
the function selection key or the machine on/
off key to cancel the function. The programme
follow-up light will remain on until the function
is canceled or the step is complete. If the
function is not cancelled, it will be active in the
subsequent washing cycles as well.
4.3.8 End Time
With the End Time function, the startup
of the programme may be delayed up to
24 hours. After pressing End Time button,
the programme's estimated ending time is
displayed. If the End Time is adjusted, End
Time indicator is illuminated.
1 Open the loading door, place the laundry
and put detergent, etc.
2 Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3 Set the end time of your choice by pressing
the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time
countdown starts. “:” symbol in the middle
of the end time on the display starts
flashing.
Adjusting the end time
If you want to cancel End Time function, press
On / Off button to turn off and on the product.
C
INFORMATION
• Do not use liquid detergents when you
activate End Time function! There is
the risk of staining of the clothes.
Содержание WHT72PEIT
Страница 24: ......
