27
Instructions for the installer
2.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures
1
and
2
.
Fixing is carried out using 4 screws at
the corners “
C
” of the oven door frame,
after removing the side panels secured
by the screws “
A
” and the supports “
B
”
as shown in figure 3. To replace the
side panels, take care to engage the
pins inside them correctly with the
supports “
B
”, then retighten the screws
“
A
”.
3.
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.