![Smeg WD1160 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/smeg/wd1160/wd1160_user-manual_1303014016.webp)
User Manual
WD2145-WD1160-WD4060-WD4190
Page 16 - 85
4.3
MANUAL DOOR RELEASE PROCEDURE
If necessary, due to a malfunction or power blackout, the appliance can be opened manually by releasing the lock
using a screwdriver with stem Ø4mm; be gentle, taking care not to damage the device.
1.
This procedure is only possible with the appliance in standby status, with no cycle running.
2.
Warning: before opening the appliance manually,
disconnect it from the electricity supply.
3.
Insert a screwdriver or a
rod 4 mm in diameter into the hole in the bottom of the centre of the front panel.
4.
Push the pin upward until the lock is released
.
fig. 5 – Diagram showing how to release the lock by hand in any emergency.
4.4
OPENING THE DOOR OF THE SIDE CABINET - WD4190 ONLY
WD4190 series models have a side cabinet with a hatch which opens like a drawer. Once the hatch is open, users have
full access to the components inside:
Main switch
(circuit-breaker),
Panel printer
(if installed),
Detergent cans.
To open the cabinet hatch, simply pull it towards you using the stainless steel handle provided.
The following are located above the panel that carries the master switch and printer:
RS232 port
: for data transmission – connection by means of TRACELOG software.
“Data output” switch
: used to activate the panel printer or data transmission on the RS-232 port. These two
devices can never operate simultaneously. The data output switch activates the RS-232 port when turned to
“I” or the printer when turned to “II”.