Instructions for the installer
40
8.1
Connection to LPG
Use a pressure regulator and make the connection on the gas cylinder following
the guidelines set out in the regulations in force.
Make sure that the supply pressure complies with the values indicated in the
paragraph “3.2 Burner and nozzle characteristics tables”.
8.2
Room ventilation
The room containing the appliance should have an air supply in accordance with
the standards in force. The room where the appliance is installed must have
enough air flow needed for the regular combustion of gas and the necessary air
change in the room itself. The air vents, protected by grills, must be the right size
to comply with current regulations and positioned so that no part of them is
obstructed, not even partially.
The room must be kept adequately ventilated in order to eliminate the heat and
humidity produced by cooking: in particular, after prolonged use, you are
recommended to open a window or to increase the speed of any fans.
8.3
Extraction of the combustion products
The combustion products may be extracted by means of hoods connected to a
natural draught chimney whose efficiency is certain or via forced extraction. An
efficient extraction system requires precision planning by a specialist qualified in
this area and must comply with the positions and distances indicated by the
regulations. When the job is complete, the installer must issue a certificate of
conformity.
