Instructions for Use
64
Trouble Shooting Guide
During the service, you can come across some troubles that in most
cases result from improper handling of the appliance and can easy be
eliminated.
The Appliance Fails to Operate After Connecting to the
Mains Supply
•
Check the supply in the outlet socket and make sure the appliance is
switched on.
The Red Light is On
•
The door was frequently opened or it was left opened for too long.
•
The door is not properly closed (the door may sag, the gasket may be
polluted or damaged).
•
Power supply has been interrupted for a longer period of time.
•
Perhaps you have overloaded the appliance with fresh foods.
Continuous Operation of the Cooling System
•
Set the thermostat knob from the position for continuos to the
position for automatic operation.
•
The reason may be inadequate ventilation of the compressor and
condenser (assure adequate air circulation behind the appliance and
wipe the dust from the condenser).
The Door is Hard to Open
If you want to open the door that has just or recently been closed, you
may find it hard to open. The reason why this happens is, that when
you open the door, warm air gets into the appliance and when it is
cooling, the underpressure seals the door. After few minutes (5-10), the
door can easily be opened.
Noise
Cooling in refrigerating-freezing appliances is enabled by the cooling
system with compressor, which produces noise. How noisy the
appliance is depends on where it is placed, how it is used and how old
the appliance is.
•
During the operation
of the compressor the noise of liquid is heard
and when the compressor is not operating, the refrigerant flow is
heard. This is a normal condition and it has no influence whatsoever
on the lifetime of the appliance.
•
After starting the appliance
, the operation of the compressor and
the refrigerant flow may be louder, which does not mean that
