User instructions
18
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
Always use the dishwasher
with a full load
.
Do not wash the dishes in running water.
Use the washing program that is
most appropriate
for each type of
load.
Do not carry out any preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to 60°C.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to save
on electricity, observe the following:
separate
the more delicate items from dishes that are more resistant
to aggressive detergents and high temperatures;
do not
pour the detergent directly on the dishes.
If the door has to be opened while washing is in progress, the program will
be interrupted. The relative light will keep flashing and a beeper will signal
that the cycle has not been completed. You must wait about
1 minute
before closing the door to restart the program. When the door is closed
the program will continue from where it was interrupted. This operation
should
only be carried out if strictly necessary
, because it might cause
problems in execution of the program.
SWITCHING OFF
At the end of the program the beeper sounds
briefly and the lights of programs no.
4
and
5
(marked "end") flash.
To switch off the dishwasher, open the door and press the
ON/OFF
button
(1)
.
ENERGY MANAGEMENT
After
5 minutes of waiting
(washing cycle completed, stopped or set but
not started) the dishwasher switches to a
standby
state to reduce energy
consumption
.
In this state, the dishwasher indicator panel (lights or display depending
on model) functions more slowly (
switch-on once
every
5 seconds
).
REMOVING THE DISHES
At the end of the washing program, wait at least
20 minutes
before
removing the dishes, to allow them to cool. To ensure that any drops of
water left in the top basket cannot drip onto the dishes still in the bottom
basket, you are advised always to
empty the bottom basket first
.
