User instructions
17
Flexi Tabs
Specifically for washing with combination detergents in
tablets
, which also
contain
salt and rinse aid
(3in1) or other agents such as glass protector,
steel rinse aids, etc. (4in1, 5in1…). When this option is selected, salt and
rinse aid will not be dispensed even if the relative compartments contain
them. If the containers are empty, the
lights
will remain
on.
If the option is not provided
, we recommend the use of
conventional
products
(separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be
deactivated
by pressing the
relative
button
(the light goes out).
These products
are not suitable
for use with
excessively “hard”
water.
If the hardness level set is higher than
H3
, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher
will still work
, but washing results may be
poor
.
CANCELLING THE CURRENT PROGRAM
To cancel the currently selected program open the door and hold
down the
PROGRAM SELECTION (3)
button for a few seconds until
the
indicator lights
for programs
4
and
5
illuminate simultaneously
(marked "end").
Close the door.
After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
