Smeg STA6444, Инструкция по эксплуатации

Страница: 19 / 42

User instructions
17
QUICK TIME OPTION
Select this option together with any washing program (except the soak
program) to
SHORTEN the cycle. To activate this option, press button
(light comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
"3/1"
The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as "3 in 1", "triple action", etc.
With this option activated, any salt and rinse aid If you wish to use
detergents which already contain salt and rinse aid already in the
dishwasher will not be used.
- N.B.: even with the " 3/1" option selected, the regenerating
salt/rinse aid lights will still stay on if their containers are empty.
IMPORTANT: when no longer required, the option must be disabled by
pressing the relative button (the light goes out).
If the water hardness has been set on a value above H3, and the “3/1”
option is activated, the relative light flashes, warning of a setting error.
3in1 products are not suitable for use with very "hard" water; this does
not prevent the use of the option, but the washing results might not be
of the best.
ULTRA CLEAN
The "ULTRA CLEAN" program prolongs the final hot rinse to ensure a
further reduction in the bacteria level. If the temperature in the tank falls
during this stage of the program (e.g. because the door is opened or due
to a power blackout), the light of the option and the program lights (
2) flash
to warn that the additional washing phase has not been completed
successfully. This does not mean that the wash program has been less
effective than usual.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.