32
If an alarm occurs the appliance interrupts the program in progress and
signals a fault.
•
Alarms
E1
,
E3
,
E4
interrupt the current program immediately.
•
The
E5
,
E6
alarms interrupts the running program once the cause is
resolved, it will bring bach the execution of the program.
To “reset” an alarm is necessary:
•
Open and close the door, or turn off and on the machine. At this
point is possible to program the dishwasher again.
If the malfunction persists, contact your authorised Service Centre.
TECHNICAL DATA
Width
59
7
÷
59
9 mm
Depth measured flush with the
outer edge of the control panel
550 mm
Height
from 820 mm to 870 mm
Capacity
1
2
Standard place settings
Water supply pressure
min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)
Electrical characteristics
See rating plate
User instructions
