Smeg ST4512IN, Руководство пользователя

Страница: 8 / 28

Consumption values
Programme
1) 2)
Water
(l)
Energy
(kWh)
Duration
(min)
9.9 0.779 240
10.5 - 12.8 0.888 - 1.086 160
9.5 - 11.7 0.713 - 0.871 90
8.7 - 10.6 0.542 - 0.663 30
2.9 - 3.6 0.012 - 0.015 15
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to: EN60436 ), contact the manufacturer.
In your request, include the model from the rating plate.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the Dry
Assist.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the on/off button until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter the user mode, press and hold
the programme button until the indicator
8