Smeg SOP6102S2PN Скачать руководство пользователя страница 21

USE  -  75

914779671/D

e

1. Select a cooking function (for example 

"FAN ASSISTED 

 

").

2. Turn the temperature knob to set the cooking 

temperature (for example "190°C").

3. Press the 

 button to start the function.

The appliance will begin preheating.
At the end of preheating:
4. Open the appliance door.
5. Insert the tray on which the food has been 

placed into the appropriate guides.

6. Insert the plug of the temperature probe into 

the socket at the side, using the probe to 
open the protective cover.

The indicator light 

 flashes on the display.

7. Close the door.

8. Press the 

 button on the display to 

change the target temperature.

9. Turn the temperature knob to set the target 

temperature (for example "80°C").

10. Press the 

 button to confirm the set 

target temperature.

11. Press the 

 button to start the function.

End of cooking parameters with the 
temperature probe

Cooking ends when the instantaneous 

temperature reaches the target temperature set 
by the user.
Heating elements are deactivated, an acoustic 
signal sounds and the display shows 

.

1. Open the door.
2. Remove the probe from the food and unplug 

it from the socket.

3. Remove the food from the oven.
4. Make sure that the protective cover is 

properly closed.

5. Close the door.

Cooking advice

General advice

• Use a fan-assisted function to achieve 

consistent cooking at several levels.

• It is not possible to shorten cooking times by 

increasing the temperature (the food could 
be overcooked on the outside and 
undercooked on the inside).

Advice for cooking meat

• Cooking times vary according to the 

thickness and quality of the food and to 
consumer taste.

• Turn the food to brown both sides.
• Use a meat thermometer when roasting 

meat, or simply press on the roast with a 
spoon. If it is hard, it is ready; If not, it needs 
another few minutes cooking.

Advice for cooking with the Grill

• Meat can be grilled even when it is put into 

the cold oven or into the preheated oven if 
you wish to change the effect of the 
cooking.

• When using the fan-assisted with grill 

function(if any), we recommend that you 
preheat the oven before grilling.

• We recommend placing the food at the 

centre of the rack.

• With the Grill function, we recommend that 

you set the temperature to the maximum 
value to optimise cooking.

Advice for cooking desserts/pastries and 
biscuits

• Use dark metal moulds: They help to absorb 

the heat better.

• The temperature and the cooking time 

depend on the quality and consistency of 
the dough.

• To check whether the dessert is cooked right 

through: At the end of the cooking time, put 

Содержание SOP6102S2PN

















































Отзывы: