background image

Use

33

EN

Suitable cookware:

•  Enamelled steel cookware with thick 

bases.

•  Cast iron cookware with an enamelled 

base.

•  Cookware in multilayer stainless steel, 

ferritic stainless steel and aluminium with 
a special base.

Unsuitable cookware:

•  Copper, stainless steel, aluminium, 

fireproof glass, wood, ceramic and 
terracotta cookware.

To see whether the pan is suitable, bring a 
magnet close to the bottom: if it is attracted, 
the pan is suitable for induction cooking. If 
you do not have a magnet, you can put a 
small amount of water in the pan, place it 
on a cooking zone and start the cooking 
zone. If the symbol 

 appears on the 

display, it means the pan is not suitable.

Limiting the cooking duration

The hob has an automatic device which 
limits the duration of use. 
If the cooking zone settings are not 
changed, the maximum duration of 
operation for each zone depends on the 
power level selected.
When the device for limiting the duration of 
use is activated, the cooking zone turns off, 
a short alert sounds and, if the zone is hot, 
the 

 symbol appears on the display.

Protection from overheating

If the hob is used on full power for a long 
period, the electronics will have trouble 
cooling down if the room temperature is 
high. 
To avoid excessively high temperatures 
forming in the electronics, the power to the 
cooking zone is reduced automatically.

Use only cookware with a 
perfectly flat bottom and suitable 
for induction cooking zones. Using 
cookware with an irregular bottom 
could jeopardise the efficiency of 
the heating system and prevent 
cookware from being detected on 
the cooking zone.

Set power level

Maximum cooking 

duration in hours

1

8

2

6

3

5

4

5

5

4

6

1  ½

7

1  ½

8

1  ½

9

1  ½

Содержание SI5641D























Отзывы: