Use
64
The
symbol appears on the front zone
display and the
symbol appears on the
rear zone display. The scroll bar will be set
automatically to level
9
. (preheating stage)
After three minutes of operation, the power
will be reduced to level
7
.
Press the
button and use the scroll bar
to modify the power level at any time.
Press the
button to deactivate the Grill
function.
Auto-Vent 2.0 function
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user
menu. Once enabled, the
button
always remains dimly lit.
This function has an automatic and a
manual mode:
• Automatic mode (default), adjusts the
hood extractor fan speed according to
the total power of the appliance (see
“User menu” - option
U8
)
• Manual mode allows you to adjust the
extractor fan speed by pressing the
button.
After switching on the hob, to activate
manual mode:
1. Press the
button, which will light up
at full brightness.
2. Each subsequent press of the button
increases the hood fan speed according
to a cyclic sequence with 5 levels of
adjustment, from 0 (off) to 4 (maximum
speed).
To go back to manual mode, the appliance
has to be switched off and on again.
• This function allows you to
control the speed of the hood
extractor fan via a wireless
connection.
• The hood must be designed to
use the Auto-Vent 2.0 function.
• The connection is always
unidirectional, from the hob to
the hood: it is not possible to
control the hob via the hood.
Refer to the hood manual for more
detailed information.
