38
Instructions for the installer
8.8
Electrical connection
Make sure that the voltage and capacity of the power line conform to the data shown on the plate located
under the casing.
Do not remove this plate for any reason.
THE ELECTRICAL CONNECTION OF THE HOB MUST BE INSTALLED BY A QUALIFIED
TECHNICIAN.
BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER SUPPLY.
IT IS OBLIGATORY FOR ALL ELECTRICAL EQUIPMENT TO BE EARTHED ACCORDING TO THE
METHODS LAID DOWN BY SAFETY REGULATIONS.
IMMEDIATELY AFTER INSTALLATION, CARRY OUT A QUICK TEST ON THE APPLIANCE
FOLLOWING THE INSTRUCTIONS PROVIDED EARLIER IN THIS MANUAL. IF IT DOES NOT
FUNCTION CORRECTLY, AFTER HAVING ENSURED THAT THE INSTRUCTIONS HAVE BEEN
PROPERLY FOLLOWED, DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY AND CALL
THE NEAREST TECHNICAL SUPPORT CENTRE.
NEVER ATTEMPT TO REPAIR THE APPLIANCE.
The manufacturer declines all responsibility
for damage to persons or things caused by the non-
observance of the above indications or as a result of tampering with any part of the appliance.
A
Connect the white terminal of the hob
(power lines) to the zone of the same
colour shown on the oven.
Also connect the earthing ring to the
appropriate marked connector.
B
Connect the blue terminal of the hob
(signal lines) to the zone of the same
colour.
Incorrect terminal connections can damage the hob. Use utmost caution at this stage.
