Smeg SGR10S, Руководство по эксплуатации

Страница: 27 / 58

ENGLISH
SGR10S Basic functions Chapter 3
Page GB 7
9.696.035 Version 1.02
3.2 Operation
Step 1: Set the desired sealing edge width. After the knurled screw has been loosened the
lower insertion plate can be set infinitely variably for sealing widths of 0 - 35mm.
Step 2: Insert packaging into the device over the insertion plate from the left.
Step 3: Take out sealed packaging at the exit side and briefly leave to cool down.
F
Inspecting the sealing seam
If points that are not tightly sealed are apparent the sealing temperature must
be increased. If the foil melts the set temperature is too high.
The appropriate sealing temperature must be identified by performing test
sealings.
Adjustable
sealing edge setting
Knurled screw