EN
8
the intensive speed timer has expired it returns to the third speed by default.
Before performing any maintenance and/or cleaning always disconnect the hood
from the power supply
Regular cleaning guarantees good operation and a long appliance service life. The
grease filters and filter hoods with carbon filters require special care.
N.B. The accumulation of grease inside the filter panels as well as affecting the
performance of the extractor, can also create a fire hazard.
The external and internal cleaning of the hood must be carried out using a damp cloth
and mild liquid detergent. Completely avoid the use of solvents or abrasives. It is
recommended to use specific products, following the instructions on the product. It is
advisable to clean the hood by always rubbing the steel in the direction of the surface
finish.
-
TIMED AUTO POWER OFF
: By pressing one of the motor speed keys (2-3), twice,
you will activate the function "Timed Auto Power Off" which turns off both lights and hood
motor after 10 mins. Activating this function is demonstrated by the LED immediately
above the pressed button flashing.
-
FILTER CLEANING SIGNAL
: the simultaneous flashing of the 4 LEDs, (programmed
to run every 200h of operation), is to indicate the need to clean /replace the filters.
By pressing the Reset button
, the 200h time can be reset. N.B. Accidentally
pressing the reset button before the 200h operation cycle does not result in the
filter being reset in the filter cleaning memory. It is good practice to clean the
grease filters and replace the active carbon filters every 200h of operation.
OPTIONAL FUNCTIONS:
FUNCTIONS AND MAINTENANCE:
EXTERNAL CLEANING:
Содержание SFL90LEDSS
Страница 1: ...Instruction booklet ...
