background image

22

Operation

GB

Automatic boost function

Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the
electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).

1. Switch a cooking zone on. The stand-by dot of the cooking zone selected

must light up. It may be necessary to press a 

Select/Plus key

.

2. Select power setting 9. Pressing the 

Select/Plus key

 again will activate

the automatic boost function.
The power level setting will indicate A and 9 alternately.

3. Then immediately use the 

Minus key

 

 to select a lower simmering

setting from 1 to 8.
A and the selected simmering setting will blink alternately.

4. The automatic boost function will operate as programmed. After a certain

time (see chart) the cooking process will be continued with the simmering
setting.

Instructions
• While the automatic boost function is in operation, the 

Select/Plus key

 can

be used to raise the simmering power setting. Pressing the 

Minus key

 will switch the automatic boost function off.

• If, after activating the automatic boost function, the power level is left at

level 9 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 9.

Cooking level

Setting

Automatic boost function

Time (min:sec)

1
2
3
4
5
6
7
8
9

1:00
3:00
4:48
6:30
8:30
2:50
3:30
4:30

-

Содержание SE644ID















Отзывы: