background image

20

Operation

GB

Operating the keys

The controls described here expect the pressing of a (selection) key 

to be

followed

 by the pressing of a subsequent key.

The next key will need to be pressed 

within 10 seconds

, otherwise the

selection will be deleted.
The Plus/ Minus keys can be touched individually or be permanently pressed.

Switching on the hob and cooking zones

1. Press the 

ON/OFF key

 

 until the power setting displays indicate 0.

The stand-by dots will blink. The controls are ready for operation. 

2. Then press the 

Select/Plus key

 (e.g. 

 for front left). The stand-by

dot of the cooking zone selected will light up.

3. Use the 

Select/Plus key

 or 

Minus key

 

 to select a cooking level.

The Select/Plus key will activate power setting 1 and the Minus key
power setting 9.

4. Put a 

metal cooking pot

 onto the cooking zone.

As long as no metal cooking pot is placed onto the cooking zone, will
power be supplied.

Repeat items 2 to 4 in order to cook on other cooking zones at the same time. 

Switching off a cooking zone

5. The stand-by dot of the cooking zone selected must light up. It may be

necessary to press the 

Select/Plus key

6. a) Press the 

Minus key

 

 several times until the power setting display

shows 0, or
b) Press the 

Minus key

  

and 

the 

Select/Plus key

 once at the same

time. The cooking zone is switched off direct irrespective of the power
setting or
c) Press the 

ON/OFF key

 

. The entire hob will be switched off (all

of the cooking zones are switched off).

Switching off the hob

7. Press the 

ON/OFF key

 

. The hob will be completely switched off,

irrespective of any settings.

STOP function

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels

have been set.

2.

Press the STOP key

 

. The letters S-T-O-P will be shown one after

another instead of the cooking levels previously selected.

3. The interruption is ended by firstly pressing the 

STOP key

 

 and then

pressing 

any other key

 (except the ON/OFF key).

The second key must be pressed within 10 seconds, otherwise the hob
will switch off.

suitable for induction cooking

Select/Plus key                                      stand-by dot

Содержание SE644ID















Отзывы: