background image

Cleaning and maintenance

33

EN

4.5 Cleaning the oven cavity

For the best oven cavity upkeep, clean it 
regularly after having allowed it to cool.
Avoid letting food residue dry inside the 
oven cavity, as this could damage the 
enamel.
Take out all removable parts.

Cleaning of racks and trays

Clean the racks and trays with warm water 
and non-abrasive detergents. Carefully 
rinse and dry damp parts.

Removing racks/trays support frames

Removing the guide frames enables the 
sides to be cleaned more easily. This 
operation should be performed each time 
the automatic cleaning cycle is used (on 
some models only).
To remove the guide frames. Pull the frame 
towards the inside of the oven to unhook it 
from its groove 

A

, then slide it out of the 

seats 

B

 at the back.

When cleaning is complete, repeat the 
above procedures to put the guide frames 
back in.

For easier cleaning, it is 
recommended to remove:
• the door
• the rack/tray support frames
•  the oven gasket

The oven should be operated at 
the maximum temperature for 
about 15-20 minutes after the use 
of specific products, to burn off the 
residues left inside the oven.

Содержание SCB60MX9



















































Отзывы: