Instructions for the user
64
8.6
Removing guide frames
Removing the guide frames makes it easier
to clean the side parts of the oven, and it
also needs to be done whenever the
automatic cleaning cycle is used (only
available on some models).
• To remove the guide frames, pull the
frame towards the inside of the oven to
unhook it from its housing
A
, then slide it
out of the seats at the back
B
.
• When cleaning is complete, repeat the
above procedures in reverse order to
put the guide frames back in.
Refer to the following diagram for setting the cleaning cycle duration:
8.7
Vapor Clean: assisted cleaning
Vapor Clean is an assisted cleaning procedure which facilitates the removal of
dirt. Thanks to this process, it is possible to clean the inside of the oven very
easily. The dirt residues are softened by the heat and water vapour for easier
removal afterwards.
Before starting the assisted cleaning cycle, make sure that the oven does not
contain any foods or large spills from previous cooking operations.
Carry out assisted oven cleaning operations only when the oven is cold.
