EN
Instructions for the User
30
14 EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the
replacement of parts subject to wear and tear, such as gaskets, light bulbs,
etc. The specific operations for each procedure of this kind are provided below.
Before carrying out any operation involving access to live parts, disconnect the
appliance from the electricity supply.
14.1 What should I do if
the oven doesn’t work?
WARNING! Any type of repair must only be done by a specialised
technician. Any repair done by a person not authorised by the
manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve the following
questions.
Failure description
Solution
The display is not
showing!
- The time indication has been switched off (see
section on Operating Settings).
Nothing happens when
I press the keys!
- The Safety Block is active (see section on
Child Safety Lock-out function).
The oven does not
work!
- Check if the plug is correctly fitted in the
socket.
- Check if the oven power is switched on.
When the oven is
operating I can hear
some strange noises!
- It has to do with the operating noises that can
occur during the cooking process, e.g, by the
water pumps in the steam generator.
- The steam inside the cavity produces a
pressure build-up and sometimes the cavity
walls may produce noise when they react to the
pressure.
- These noises are normal, there is no problem.
The
food doesn’t heat
up
or
heats
very
slowly!
- You have selected the correct operating times
and temperature setting.
- The food you have put inside the oven is a
larger amount or colder than you usually put in.
The message “Err_”
appears in the display
- Please contact the Customer Care.
The
appliance
still
makes a noise after
the cooking process is
finished!
This is not a problem. The cooling fan keeps on
working for some time. When the temperature
has dropped sufficiently, the fan will switch itself
off.
The oven switches on
but the interior light
does not go on!
If all the functions work properly it is probable
that the lamp has blown. You can keep on using
the oven.
Display shows
Perform water level calibration (see 8.3.2)