background image

51

Instructions for the user

7.7.2

Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to
be started and then ended after a specific length of time set by the user.

Select a cooking function (see point “7.6 Selecting a function”) and press
PT1 twice. The display will show the 

 figures and the 

 symbol

(flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59). A few seconds after the desired duration is set, the 

 symbol will

stop flashing, and semiautomatic cooking will start from that moment. At
the end, the word STOP will appear on DSP, cooking will stop and a
buzzer will sound; press PT1 once to deactivate it. To exit from the
semiautomatic cooking settings, press PT1 again.

To switch the oven off completely, turn PT2 to the “0” symbol.

Modifying the data set

Once semiautomatic cooking has started, its duration can be changed.
When the 

 symbol is steady, press PT1 once. The 

 symbol starts

flashing and PT1 can be turned to select the desired value. A few seconds
after the last change, the 

 symbol will stop flashing, and semiautomatic

cooking will restart from the new value.
To change the preset temperature, wait for the 

 symbol to become

steady and turn PT1 to the right or left to increase or decrease the cooking
temperature. About 5 seconds after the user has last adjusted PT1, the
time left until the end of cooking will be displayed on DSP.

Содержание SC106-2






































Отзывы: