Washing Machine /User’s Manual
33 / EN
Maintenance and cleaning
a Pull away the emergency water draining hose
from its housing.
b Put the larger end of the hose into a large
vessel. Pull and remove the plug at the end
of the hose and drain the water into a vessel.
When the vessel is full, shut the nozzle of the
hose by inserting the plug into it. After you
empty the vessel, repeat above procedures and
drain the water inside the machine fully.
c When the water drainage is complete, block its
nozzle again with the plug and secure the hose
into its place.
d Turn and remove the pump filter.
Clean any residues inside the filter as well as
fibers, if any, around the pump impeller region.
5. Replace the filter.
6. If the filter cap is composed of two pieces, close
the filter cap by pressing on the tab. If it is one
piece, seat the tabs in the lower part into their
places first, and then press the upper part to
close.
