60
Instructions for the User
12.6.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the holes
from the inside. Close the door to an angle of about 45° and lift it off. To
reassemble, fit the hinges into their grooves, then lower the door into place
and extract the pins.
12.7 Removing the door glazing
They should always be kept thoroughly clean. For easier cleaning, the
door glazing can be fully removed by proceeding as described below.
After opening the door and locking it in place as described in point “12.6
Removing the door”, remove the two panes of glass. They are all removed
in two stages: firs textract the pane from the guide "A" (see detail) by
sliding it towards you and lifting it slightly, then also free it from the guide
"B".
If the door should close during these operations, simply relock one of the
hinges as described in point “12.6 Removing the door”. The panes of
glass can now be washed separately.
Use absorbent kitchen roll; remove stubborn dirt with a damp sponge and
ordinary detergent.
Warning: before removing the panes of glass, make sure that the door has
been locked in open position as described in point "12.6 Removing the
door". This operation might have to be repeated during the removal
process if the door is accidentally freed.
After cleaning reassemble the internal glasses following the given
inctructions in reverse order.
DANGER: do not use the product without glasses: the door surface will
overheat
