background image

Use

67

EN

A gas leak can cause an explosion.

If you smell gas or there are faults in the gas 
system:
• Immediately turn off the gas supply or 

close the valve on the gas cylinder.

• Extinguish all open flames and cigarettes.
• Do not turn on power switches or 

appliances and do not remove plugs 
from power sockets. Do not use phones 
or mobile phones inside the building.

• Open the window in order to ventilate 

the room.

• Call customer assistance services or your 

gas supplier.

Malfunctions

Any of the following indicate a malfunction 
and you should contact a service centre:
• Yellowing of the burner plate.
• Damage to kitchen utensils.
• The burners do not ignite properly.
• It is difficult to keep the burners lit.
• The burners go out when the appliance 

is in use.

• It is difficult to turn the gas valves.
If the appliance does not work properly, 
contact your local Authorised Service 
Centre.

First use

1. Remove any protective film from the 

outside or inside of the appliance, 
including accessories.

2. Remove any labels (apart from the 

technical data plate) from the 
accessories and from the oven cavity.

3. Remove and wash all the appliance's 

accessories (see 4 Cleaning and 
maintenance).

4. Heat the empty oven at the maximum 

temperature to burn off any residues left 
by the manufacturing process.

High temperature inside the oven 
during use

Danger of fire or explosion

•  Do not spray any spray products near 

the oven.

•  Do not use or leave flammable materials 

near the oven or the storage 
compartment.

•  Do not use plastic cookware or 

containers when cooking food.

•  Do not put sealed tins or containers in 

the oven.

•  Do not leave the oven unattended 

during cooking operations where fats or 
oils could be released.

•  Remove all trays and racks which are 

not required during cooking.

Содержание PRIMASCB9N



















































Отзывы: