Smeg Oven, Инструкция по эксплуатации

Страница: 18 / 44

Instructions for the user
EN
20
7.6 Programming clock
Timer
End of cooking
Time setting and reset
Value decrease
Value increase
The buzzer that sounds at the end of each programming will be made up of 10
buzzes repeated 3 times at intervals of about 1 minute. It can be stopped at any
time by pressing any key.
7.7 Analogue clock operation
7.7.1 Setting the time
When the oven is used for the first time, or after a power supply failure, the
display flashes at regular intervals.
Press the key to stop the display flashing. Press key again for 2
seconds; the current time can now be set. Press the value modification keys
or to increase or decrease the setting by one minute for each pressure.
Press either of the value modification keys to display the current time. Five
seconds after last pressing the key, the clock will start from the set time.
7.7.2 Timer
This function only activates the buzzer, without
stopping cooking.
• Press and the display will light up as shown in
figure 1;
• Within 5 seconds press key or
to set the timer. Each time a key is
pressed, an outer segment representing 1
minute of cooking is lit or switched off (figure
2 shows 1 hour and 10 minutes).
• Five seconds after last pressing the key the
countdown begins, at the end of which the buzzer
activates.
• The current time can be viewed during the
countdown by pressing key once, press the
key again to return to the timer display.
1)
2)