User instructions
15
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph “
S
TARTING THE PROGRAM
”. The program will resume from the
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program will
start about 30 seconds later.
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
It is not possible
to select any options when the
soak program
is being used.
All options
except "Flexi Tabs"
are
disabled
at the end of the
wash cycle. To
disable the “Flexi Tabs” option, press
the
relative button (the light goes out).
All options, including
"Flexi Tabs"
are
disabled when a program
is
CANCELLED
after it has begun.
PROGRAM DELAY
The
PROGRAM DELAY
button can be pressed to delay the start of the
washing program by
3, 6 or 9 hours
. This function allows you to set the
dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the “program delay” set
previously will come into effect (light indicating the time left before the start
of the program and light indicating the program set
flash
).
N.B.:
It is not possible to select the
PROGRAM DELAY
option once the
cycle has begun.
Содержание LSP222BIT
Страница 2: ......
