User instructions
14
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
(*)
ECO
program
Load
9
place-settings
Type of detergent
B
Amount of detergent
30 g
Rinse aid setting
Depending on the model 3/4 or 4/6
START PROGRAM
To start the
dishwasher, press the
START/PAUSE button (4)
for a few seconds,
until
the light of the first phase of the selected program starts to flash (confirmation beep).
A
s the program runs,
the
PHASES/PROGRAM
lights
(8)
will
indicate the current cycle
status:
END PROGRAM
When the program finishes, a buzzer sounds briefly and all the
PROGRAM PHASES
lights
(8)
flash. Press any of the
SELECTION
PROGRAMS
buttons
(2)
, stops the light flashins, and the
dishwasher is now ready to perform a new cycle; opening and
shutting the door or switching the appliance off and on has the same
effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•
press
the
START/PAUSE
button
(4)
, the light of the current phase goes out;
•
keep the button pressed until the
PROGRAM PHASES
lights
(8)
come on (confirmation
buzzer).
Prewash
Wash
Rinse
Dry
The light of the phase in progress will flash, while
the lights of previous and subsequent phases remain on.
N.B.
during execution of programs which do not
include a prewash, the first
PHASES/PROGRAM
light
(8)
will remain off.