Smeg LS647XNL2, Инструкция по эксплуатации

Страница: 13 / 35

User instructions
11
STARTING THE PROGRAM
To start the dishwasher, press the START/PAUSE button (3) for a few
seconds, until the light of the first phase of the selected program starts to
flash (confirmation beep).
As the program runs, the PHASES/PROGRAM lights (5) will indicate the
current cycle status.
The light of the phase in progress will flash, while the lights of the
subsequent phases remain on.
N.B. during execution of programs which do not include a prewash, the
first PHASES/PROGRAM light (5) will remain off.
DISPLAY OF END OF WASH CYCLE
Short sound from buzzer >>> PROGRAM SELECTION BUTTON light
flashes until appliance is switched off or a new wash cycle is set.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
•
press the START/PAUSE button (3 ) for a few seconds; the light of
the phase in progress remains on and the light of the program in
progress flashes (confirmation beep);
•
you may now restart the program by pressing button (3) again until it
restarts, or change or annul the program (see "C
HANGING A
PROGRAM
", or "A
NNULLING A PROGRAM
").
CHANGING A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “I
NTERRUPTION A PROGRAM
”);
•
select the new program;
•
start the program (see “S
TARTING THE PROGRAM
”).