background image

Instructions

7

EN

• The settings for this domestic 

appliance are shown on the gas 
setting label. 

• This domestic appliance is not 

connected to a device for 
extracting combustion products. It 
must be installed and connected in 
accordance with current 
installation regulations. Pay 
particular attention to the relevant 
requirements regarding ventilation.

For this appliance

•  Do not obstruct ventilation 

openings and heat dispersal slots.

•  Do not insert pointed metal 

objects (cutlery or utensils) into 
the slots in the appliance.

• Do not use the appliance to heat 

rooms for any reason.

1.2 

Manufacturer liability

The manufacturer declines all liability 
for damage to persons or property 
caused by:
•  use of the appliance other than 

the one envisaged,

•  failure to comply with the 

instructions in the user manual,

•  tampering with any part of the 

appliance,

•  use of non-original spare parts.

1.3 Appliance purpose

•  This appliance is intended for 

cooking food in the home 
environment. Every other use is 
considered inappropriate.

•  The appliance is not designed to 

operate with external timers or with 
remote-control systems.

Содержание Linea PX7502AU





























Отзывы: