Smeg LBS65F, Руководство пользователя

Страница: 8 / 12

8 - EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
C Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary function
selection will remain active.
For example: If you want to select pre-wash
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see “Program
Selection Table”)
• Prelavaggio (Prewash)
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time. Pre-wash without
detergent is recommended for lace and
curtains.
• Risciacquo Aggiuntivo (Rinse Plus)
With this function, you can increase the
number of current rinsing steps. Thus, sensitive
skins’ risk of being affected by the remainder
detergent on the clothes will be decreased.
• Antipiega (Rinse Hold)
If you do not want to unload your clothes
immediately after the cotton, synthetics, woolen
and delicate fabrics program, you may release
your clothes inside the machine in the last
rinsing water by pressing the rinse hold button in
order to prevent your clothes become wrinkled.
After this process you may spin your laundry
by pressing “Start/Pause/Cancel” button or you
may end the program by pressing “Start/Pause/
Cancel” button for 3 sec.
• In the machines equipped with spin speed
selection knob or button, you can spin by
selecting the desired spin speed and press
“Start/Pause/Cancel” button.
• As for machines not equipped with a spin
speed selection knob, you can end the
program without a spin cycle by pressing the
“Start/Pause/Cancel” button and draining
the water. If you wish your clothes be spun,
you can spin them by selecting “pump+spin”
program.
• No Heat
If you wish to wash your clothes in cold water,
you can use this program.
• Esclusione Centrifuga (No Spin)
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
• Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes below
the maximum spin speed. When speed
reduction button is pressed, spin speed will be
at the minimum rpm given on the panel.
Starting the Program
Press “Start/Pause/Cancel” button to start the
program. “Start/Pause/Cancel” button will light
up to indicate that the program has started. The
door is locked and the “Lid” light fades.
Progressing a program
Progress of a running program is shown through
the program follow-up indicator. At the beginning
of every program step, the relevant indicator
lamp will light up and light of the completed step
will turn off.
C If the machine is not spinning, the program
may be in rinse hold mode or the automatic
spin correction system has been activated
because of excessive unbalanced
distribution of laundry in the machine.
Changing the selections after the
program has started
You can use this feature after your machine has
started to wash different textile groups in the
same batch of clothes under higher or lower
temperatures. You must cancel the ongoing
program in order to change the washing
program.
For example, press and hold the “Start/Pause/
Cancel” button for 3 seconds to “Cancel” the
program in order to select “Cottons 40” program
instead of “Cottons 60” program. Select the
“Cottons 40” program by rotating the program
knob. Press “Start/Pause/Cancel” button to start
the program.
Switching the machine to standby
mode
Press “Start/Pause/Cancel” button momentarily
to switch your machine to the standby mode.
Auxiliary functions can be cancelled or selected
in accordance with the step the program is at.
The door can be opened if the water level is
suitable. Laundry may be added / taken out by
opening the door.
Child-proof lock
You can protect the appliance from being
tampered by children by means of the child-
proof lock. In this case, no change can be
made in the running program.
This function protects the appliance from being
tampered by children. In this case, all of the
buttons are inactive except On/Off button;
by On/Off button you can whether stop or