background image

EN - 27

EN - 27

7.3 Pump Filter

1

3

5

2

4

6

The pump filter system in your Washing 

Machine prolongs the life of the pump by 

preventing lint from entering your machine.  

We recommend that you clean the pump 

filter every 2 months. 

The pump filter is located behind the cover 

on the front-lower right corner. 

To clean the pump filter: 

1. 

You may use the washing powder spade 

(*) supplied with your machine or liquid 

detergent level plate to open the pump 

cover. 

2. 

Lodge the end of the powder spade 

or liquid detergent level plate in the 

opening of the cover and gently press 

backwards. The cover will open. 

• 

Before opening the filter cover, place a 

container under the filter cover to collect 

any water left in the machine. 

• 

Loosen the filter by turning anticlockwise 

and remove by pulling. Wait for the 

water to drain. 

NOTE: 

Depending on the 

amount of water inside the machine, you 

may have to empty the water collection 

container a few times. 

3. 

Remove any foreign materials from the 

filter with a soft brush. 

4. 

After cleaning, re-fit the filter by inserting 

it and turning clockwise. 

5. 

When closing the pump cover, ensure 

that the mountings inside the cover 

meet the holes on the front panel side. 

6. 

Close the filter cover. 

WARNING: 

The water in the 

pump may be hot, wait until it has cooled 

down before carrying out any cleaning or 

maintenance.

(*) Specifications may vary depending on 

the machine purchased. 

7.4 Detergent Drawer

The use of detergent may cause residual 

build up in the detergent drawer over time. 

We recommend that you remove the drawer 

every 2 months to clean the accumulated 

residue.

To remove the detergent drawer:

• 

Pull the drawer forwards until it is fully 

extended. 

• 

Press the region shown below inside 

the detergent drawer you have pulled 

all the way back, and continue pulling 

and remove the detergent drawer from 

its place

• 

Remove the detergent drawer and 

disassemble the flush stopper. Clean 

thoroughly to completely remove any 

softener residue. Refit the flush stopper 

after cleaning and check that it is seated 

properly. 

Содержание LB3T92PIT



































Отзывы: