Smeg KI90XE, Инструкция пользователя, Страница: 18 / 153

EN 6
2-DIGIT 10-KEY CAPACITIVE PUSHBUTTON BOARD:
Key Function Display
A Turns the suction motor on / off. Displays the set speed
B Decreases the operation speed. Displays the set speed
C Increases the operation speed. Displays the set speed
D
Activates the Intensive speed from any speed even with the
motor off, this speed is timed. At the end, the system returns to
the speed previously set. Suitable for dealing with the maximum
emissions of cooking fumes.
Displays alternatively HI
Hold the button down for about 5 seconds, when all loads are off
(Motor + Light), to switch the keyboard lock On / Off.
"- -" Keyboard lock On.
E
24 H function
Activates the motor at the first speed and allows extraction for
10 minutes every hour.
It displays 24 and the point at the
bottom right flashes once a second,
while the motor is in operation. Press
the key to disable it.
Holding the button down for about 5 seconds when all loads are
off (Motor + Light), holding key "B" down during the animation,
the Active Carbon Filters Alarm switches On / Off.
Displays a rotary animation for
5 seconds. "EF" flashes twice in
activation. "EF" flashes once in
deactivation.
F
Delay function
Enables the automatic shutdown delay of 30'. Suitable for
removing residual odours. Can be activated from any position.
You disable it by pressing the key or turning the motor off.
Displays the operating speed and the
point on the lower right flashes.
G
With the filter alarm in progress, pressing the key for about 3
seconds resets the alarm.
After the procedure, the signal
previously displayed turns off:
FF signals the need to wash the
metallic grease filters. The alarm
comes on after 100 hours of actual
operation of the Hood.
EF signals the need to replace the
active carbon filters and the metallic
grease filters must also be washed.
The alarm comes on after 200 hours of
actual operation of the Hood.
H
Decreases the light intensity at each press of the Key in a cyclic
manner.
1 Turns the lighting system on and off at maximum intensity.
L
Increases the light intensity at each press of the Key in a cyclic
manner.
Keyboard lock command: you can lock the keyboard, for example, to clean the glass
surface, when the Hood has the motor and lights switched off. By pressing key D
for about 5 seconds, you can enable or disable the keyboard lock which is always
confirmed with:
“- -” Keyboard lock On.