Conversion Kit
6
4)
Replacing the oven's burners nozzles
(This operation does not require primary air regulation.)
Oven burner
1 Open the oven door
and remove any
accessories that are
inside.
2 For 35” - 908mm model
unscrew the two
fastening screws before
removing the oven floor.
1)
2)
3 Lift the oven floor and
slide it out.
4 Unscrew the burner's
fastening screw.
3)
4)
5 Remove the burner
from its place by sliding
it out and moving it to
the side. (Make sure
not to damage the
thermocouple or the
spark electrode during
this operation).
6 Using a 7mm socket
wrench replace the
nozzle installing the
one that is appropriate
for the type of gas to be
used. Refer to the gas
charts at point 5.
5)
6)
7 WARNING:
The
tightening torque of the
nozzle must be equal to
4Nm.
8 After replacing the
nozzle, put the burner
back in its place. (Make
sure not to damage the
thermocouple or the
spark electrode during
this operation).
7)
8)