User instructions
12
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the
START/PAUSE
button
(2)
for a
few seconds, until the
PROGRAM STARTED
light
(6)
stops flashing.
Now press the
START/PAUSE
button
(2)
again until "
P0
" appears on the
display (about
10 seconds
).
CHANGING THE PROGRAM
To modify the program keep the
START/PAUSE
button
(2)
pressed for a
few seconds, until the
PROGRAM STARTED
indicator light
(6)
stops
flashing, then select the new program following the instructions provided
above; press the
START/PAUSE
button
(2)
again and keep it pressed
for a few seconds, until the indicator light
(6)
starts to flash again.
SELECTING HALF LOAD WASH (on some models only)
(available in all programs except the soak program)
This function is ideal for small loads and saves water and electricity.
It is controlled by the
HALF LOAD (4)
button, as follows:
1) press the button
once
to select washing in the
top basket
(the light
(8)
comes on and the
U
appears in the top of the display to confirm
the selection);
2) press the button
a second time
to select washing in the
bottom
basket
(the light
(8)
remains on and the
U
appears in the bottom of
the display);
3) press the button
a third time
to return to the normal
full load
washing
mode (washing in both baskets, both lights off and no letter on the
display).
The option is disabled at the end of the cycle.
One half of the cutlery basket can be placed in the ½ LOAD program
basket.
WARNING: dishes and cutlery placed in the basket not selected will
not be washed.
