User instructions
11
Only
run the soak program with half loads.
(*)
Reference program as per
EN 50242
standard
(**) See
display.
(***) See
energy
label.
The
DELAYED START (3), ½ LOAD WASH (4) and “3/1” (5)
options
cannot
be used with the
soak
program.
(1)
Average power consumption with the softener set on
level 2
.
(2)
The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
3.3 Washing programs
The dishwasher is equipped with a control panel and an
3-FIGURE
DISPLAY (7)
, described in chapter "3. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
