Smeg FA490, Инструкция по эксплуатации

Страница: 28 / 37

28
6.3 Installation warnings
Before using your appliance for the first
time, please pay attention to the follow-
ing points:
• The operating voltage for your appli-
ance is 220-240 V at 50Hz.
• The plug must be accessible after
installation.
• Your appliance may have an odour
when it is operated for the first time.
This is normal and the odour will fade
when your appliance starts to cool.
• Before connecting your appliance,
ensure that the information on the
data plate (voltage and connected
load) matches that of the mains
electricity supply. If in doubt, consult
a qualified electrician.
• Insert the plug into a socket with an
efficient ground connection. If the
socket has no ground contact or the
plug does not match, we recommend
you consult a qualified electrician for
assistance.
• The appliance must be connected with
a properly installed fused socket.
The power supply (AC) and voltage
at the operating point must match with
the details on the name plate of the
appliance (the name plate is located
on the inside left of the appliance).
• We do not accept responsibility
for any damages that occur due to
ungrounded usage.
• Place your appliance where it will not
be exposed to direct sunlight.
• Your appliance must never be used
outdoors or exposed to rain.
• Your appliance must be at least 50
cm away from stoves, gas ovens and
heater cores, and at least 5 cm away
from electrical ovens.
• If your appliance is placed next to a
deep freezer, there must be at least 2
cm between them to prevent humidity
forming on the outer surface.
• Do not place heavy items on the
appliance.
• Clean the appliance thoroughly be-
fore use (see Cleaning and Mainte-
nance).
• Behind the appliance, in the lower
part are the spacers that determine
the minimum distance from the rear
wall.
• The distance between the appliance
and back wall must be a maximum
of 75 mm.
Installation