User instructions
16
NOTES AND REFERENCES
Only
run the soak program with partial loads.
The options
cannot
be used with the
soak
program.
The
ENERSAVE
option cannot be used with
soak, ultraclean
, or any programs
which
do not include
the final drying stage.
*
Standard program under
EN 50242
. If present, the
ENERSAVE
option must be
enabled.
**
See information sheet provided
***
IEC/DIN
reference program. If present, the
ENERSAVE
option must
be
enabled
.
**** Reference program for laboratories. Detergent:
20 g
in the
dispenser
+
10 g
in
the
door
or tablet. Configuration: see photo in "using the baskets" section.
(1)
Program consumption and duration figures have been measured in accordance
with the
EN 50242
standard. Values may vary depending on water supply and
ambient temperatures and the type and quantity of dishes loaded.
REFERENCES
for the
ENERGY LABEL
supplied with the dishwasher:
-
Annual energy consumption is based on
280 standard wash cycles
with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.
-
Water consumption is based on
280 standard wash cycles
. Actual
consumption depends on the way in which the appliance is used.
-
Information refers to the
EN 50242 STANDARD
program (identified in the
program table), which is the most effective in terms of combined energy and
water consumption. The program is recommended for dishes with a normal
level of dirt.
-
Drying efficiency class on a scale from
“G”
(minimum efficiency) to
“A”
(maximum efficiency).
