18
Dryer / User Manual
5.11 Changing the programme after it
has started
• After the dryer starts operation, you can
change the selected programme and dry
your laundry in a different programme.
• Press and hold Start / Pause button for 1
seconds to pause the programme.
• Select desired programme by turning the
Programme Selection knob.
• Press the Start/Pause button to start the
program.
Adding / removing laundry while the dryer
is in operation
• In order to add or take out laundry after
the drying programme has started:
• Press the Start/Pause button to switch
the dryer to Pause mode. Drying process
will pause.
• While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
• Press the Start/Pause button to resume
the program.
C
NOTE
• Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
• You may repeat laundry adding or
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
• If you select a new programme by turning
the Programme Selection knob while your
drier is in Pause mode, then the current
program is aborted and new programme
information is displayed.
WARNING!
• Do not touch the inner surface of the
drum when adding or taking out laundry
while a programme is running. Drum
surface and dryer air within is hot.
5.12 Canceling the programme
To cancel the programme after the dryer is
started:
• Press and hold Start / Pause button for
1 seconds to pause the programme and
turn the programme selection knob.
• Press and hold On / Off / Cancel Button
for 3 seconds and the programme will be
cancelled.
A
WARNING!
• As the dried laundry will be excessively
hot when you cancel the programme
while the dryer is running, activate the
Refresh programme to cool them down.
5.13 End of programme
When the programme comes to an end Lint
filter cleaning and Water tank warning symbols
light up in the programme follow-up indicator.
To turn off the dryer press On / Off / Cancel
button.
C
NOTE
• 2-hour Anti-creasing program will be
activated if the laundry is not taken out
after the program has come to an end.
