17
Dryer / User Manual
Draining the water tank
When the programme is completed, a warning
symbol will appear continously to remind that
the water tank needs to be drained.
C
NOTE
• For detailed information, see Maintenance
and cleaning.
If the water tank becomes full while the
programme is running, the warning symbol will
start to flash and the dryer will pause. Drain the
water in the water tank and press Start / Pause
button to resume the programme. The warning
symbol turns off and the programme resumes
operating.
Cleaning the filter drawer
Warning symbol flashes to remind that the filter
drawer needs to be cleaned.
C
NOTE
• For detailed information, see Maintenance
and cleaning.
Loading door open
This warning symbol Pause appears and
programme progress symbol flashes when the
loading door of the dryer is open.
5.8 Starting the programme
Press the Start/Pause button to start the
program.
Start symbol will light up to indicate that
the programme has started and “:” symbol
in the middle of the remaining time will keep
flashing. Drying and programme progress bar
will be displayed alternately.
5.9.Progress of programme
5.10 Child Lock
Machine is equipped with a Child Lock which
prevents interfering with the current programme
flow by pressing any button.
To activate the Child Lock:
• Press and hold Childproof Lock button for
3 seconds.
• Child Lock symbol will appear on the
display when the Child Lock is activated.
• All buttons except the On/Off/Cancel and
Child Lock button on the control panel
are deactivated when the Child Lock is
active.
• Display symbols will not change even if
the position of Programme Selection knob
is changed while the child lock button is
active.
• When the programme selection knob is
turned and function buttons are pressed
Child Lock warning will be displayed.
• To start a new programme after the
current programme is over or to interrupt
the current programme, the Child Lock
should be deactivated.
To deactivate the childproof lock:
• Press and hold Child Lock button for 3
seconds.
Child Lock is deactivated when the dryer is
switched off and on with On/Off/Cancel button.
