User instructions
9
MODELS WITH INTERNAL LIGHTING
THE APPLIANCE’S LIGHTING SYSTEM
BELONGS TO RISK GROUP 1 UNDER THE
IEC/EN 62471 STANDARD. THIS MEANS
THAT THERE IS NO PHOTOBIOLOGICAL
RISK IN NORMAL CONDITIONS OF USE.
IMMEDIATELY AFTER INSTALLING THE
DISHWASHER, PERFORM A QUICK TEST
OF THE APPLIANCE FOLLOWING THE
INSTRUCTIONS BELOW. IF THE
DISHWASHER FAILS TO OPERATE
CORRECTLY, DISCONNECT IT FROM THE
ELECTRICAL POWER SUPPLY AND CALL
THE NEAREST TECHNICAL SERVICE
CENTRE.
DO NOT ATTEMPT TO REPAIR
THE APPLIANCE.
THE DISHWASHER MEETS ALL THE
REQUIREMENTS SET OUT BY THE
REGULATIONS IN FORCE CONCERNING
SAFETY AND ELECTRICAL EQUIPMENT.
ANY TECHNICAL CHECKS SHOULD BE
CONDUCTED EXCLUSIVELY BY A TRAINED
AND AUTHORISED TECHNICIAN:
REPAIRS
CARRIED OUT BY UNAUTHORISED
PERSONS WILL INVALIDATE THE
WARRANTY, AS WELL AS POSING A
POTENTIAL HAZARD TO THE USER.