User instructions
START PROGRAM
To start the dishwasher, press the button of the
PROGRAM (2)
required
for a few seconds, until the light of the first phase of the selected
program starts to flash (confirmation beep).
As the program runs, the
PHASES/PROGRAM
lights
(7)
will indicate the
current cycle status.
The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.
N.B.
during execution of programs which
do not include a prewash, the first
PHASES/PROGRAM
light
(7)
will remain
off.
END PROGRAM
When the program finishes, a buzzer sounds
briefly and all the
PHASES/PROGRAM
lights
(7)
flash.
Press any of the
SELECTION PROGRAMS
buttons
(2)
, stops the light
flashins, and the dishwasher is now ready to perform a new cycle;
opening and shutting the door or switching the appliance off and on has
the same effect.
Prewash
Wash
Rinse
Dry
