User instructions
21
•
Do not use table salt as it contains insoluble substances which,
over time, may damage the water softening system.
•
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE WATER SOFTENING SYSTEM
(available in all programs except the soak program)
The dishwasher is equipped with an electronic device for adjusting the
water softening setting according to the hardness of the water. To adjust
the water softening setting, proceed as follows.
•
Keep
the
SELECTION PROGRAMS
button
(2)
pressed for a few
seconds, until
H3
(default value) appears on the
DISPLAY (9)
.
•
Keep pressing the
SELECTION PROGRAMS (2)
button again to
scroll through the setting values available in sequence
(from
H 0
to
H 5
). Select the most suitable value, referring to the
"Water hardness table" for guidance.
•
To exit the programming mode press the
START/PAUSE
button
(3)
or do not touch the keypad for
2 seconds
to allow the system to exit
the mode automatically.
Содержание DC136LW
Страница 1: ...INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS ...
Страница 2: ......
